For people wondering what you get when you order a $350 laser cutter off eBay. I purchased this 2 years ago and have had no issues. All of my project posts are using this machine, although I have upgraded/modded the machine since purchase

Here was the original posting, doesn’t look like this sellar is around anymore

Shipped from a warehouse in California so I didn’t have to do any import stuff

Double boxed with unformed styrofoam

Inside stuffed with the “accessories” which were mostly tossed in the garbage, and some loose foam. ![](https://i.imgur.com/Wx8TWeU.jpegk

Cutting bed and fume extractor both of which I would later remove as part of the modifications

They had the water cooling tubes routing out through the exhaust fan for shipping, easy process of rerouting them during the initial setup

Lots of info online about ensuring proper grounding with these. I filled the guides around sanding off the paint to ensure good contact with the metal from the case. I think this is probably the only https://i.imgur.com/psS1TY8.jpeg I did before the first cut

This splice on the high voltage line seemed pretty ghetto to me, but the internet “experts” on the K40 forums assured me this was fine/normal.

Stock fume extractorbfan and water cooling tubes. I added a water movement indicator and removed the fan and added a inline exhaust as part of later mods.

Mirrors were hot glued in place, but actually alignment was perfect right out of the box for me and this thing cut without issue on the first try. Over the years of mods and banging it around I have removed the glue and fine tuned but the tube and mirrors have held up well.

Here it is today in all it’s glory. I will do other posts on the upgrades later down the road.