Is it too early to give this a go as a new Linux user? From my research online Asahi is my option but it’s still very limited.

  • hermes2000@infosec.pub
    link
    fedilink
    arrow-up
    10
    ·
    1 year ago

    It works fairly well. A “daily driver” if you don’t mind tinkering. Installed some basic dev tools, runtimes, and container workloads. You’ll miss some QOL and efficiencies compared to macOS, and I couldn’t quite get the trackpad to feel as good, but that’s pretty par-for-the-course when it comes to running a non-macOS OS on a MacBook.

    Since dual-boot is the default install option, doesn’t hurt to carve other some space for Asahi and give it a whirl. You’re intended to be able to use both on the same system as needed.

  • Drew Got No Clue@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    I have plenty of RAM and I run Linux on a VM. Works like a charm. You can even use open source hypervisors like UTM.

    I wouldn’t bother running it on bare metal just yet.

  • PseudoSpock@lemmy.fmhy.ml
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    I’m using Ubuntu on mine almost daily as a VM with UTM in hypervisor mode. Can’t call 3d acceleration stable yet, it can lock up often… but with that, I only get about one lockup a week.

  • unixgeek@reddthat.com
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    I was researching this option last year and after talking with the Asahi crew via IRC, their advice was at least 16GB of memory and 512GB for SSD because you do have to keep macOS around for certain tasks, like firmware updates. With smaller amounts of disk space and memory, the system will use swap which can use a lot of the write cycles on the SSD.

    You should probably check to see if this is still their recommendation.

    • Anissem@lemmy.mlOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Thanks! Will look into it. My needs are simple so as long as I can handle a few things I want to try.