What I’ve done is take a large 2n3055 BJT NPN power transistor, and decap it (it is a large metal-can type). Then I carefully removed any coating from the exposed silicon (it typically has a dab of silicone potting compound on it).

Then, I had a weak alpha source at ~5MeV lying around the lab from previous work. This was inserted into the can with the beam facing downward towards the exposed silicon, and the can reattached and made lightproof.

Then I threw together the circuit shown here using the modified transistor (the base is left floating). What I expected to happen was that at TP1 (relative to GND), with my scope AC-coupled, I should see small voltage spikes followed by a decay. This is caused by alpha particles impacting the silicon and knocking loose enough electrons to permit some current flow.

However, I just see… more or less nothing, maybe some electrical noise from fluorescent lamps in the room next door. Certainly not the spike+decay curve I’ve seen with other detectors.

Did I make a wrong assumption somewhere? It’s been a while since I worked with discrete transistors much, and I feel like I am missing something silly.

Or is this more or less right, and I should maybe question whether my alpha source is still good? Or whether the signal strength is in a voltage domain I can even clearly see without amplification? Or maybe I should suspect that a thin passivating glass layer is added to big BJTs these days, enough to block the alpha?

The source is past expiry, but not by that much. I’m mostly interested in characterizing and documenting the detector as an academic exercise.

  • Link9454@kbin.social
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    I work with a lot of particle detectors. Instead of this, I recommend a photo diode and laser diode. Light dispersal particle counting is relatively easy to pull off by comparison to scraping off coating and all that. You could even use a very small segment of solar panel and a light source or an IR detector and IR LED similar to a smoke detector.

    • Saigonauticon@voltage.vnOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Ah, by ‘particle’ in this context I mean ‘single helium nuclei traveling near the speed of light’. Not counting dust particles e.g. in a clean room.

      If I’ve misunderstood the situation and I actually can use light diffusion in this context, I would love to hear more!