This is a follow-up to my earlier posts:

https://lemmy.sdf.org/post/12809764 https://lemmy.sdf.org/post/19600671

We’re Getting Closer.

It’s just small stuff left that needs a bit of piecing together, though I’ve now been daily driving my port for the past two weeks already.

This Works

  • booting
  • display
  • touch
  • modem <- You might have to switch to the other slot if it does not work: mmcli -m 0 --set-primary-sim-slot=1, options are 1 or 2. Note that the modem could also be a different number, maybe try -m 1 if it is not found as the command will reboot the modem and then it changes.
  • plymouth
  • battery/charging
  • mobile data
  • wifi
  • torch
  • suspend
  • call audio
  • vibration
  • Bluetooth™
  • full disk encryption
  • eSIM (I’m working on the packaging for the tool you need to provision it)
  • SMS
  • audio (ALSA config not packaged, but can be added manually)
  • camera (have taken a few photos, but the kernel driver is still work in progress and sometimes it just does not work)

This Has An Unknown Status

  • Fingerprint Sensor
  • NFC (should work, does so on pmOS)

This Does Not Work Yet (Soon™)

  • GPS
  • USB host mode (no Kernel support yet, but apparently this is being worked on)
  • Verified Boot (first need to do research whether this is actually feasible)

This Is Missing And Will Come Later

  • accelerometer
  • magnetometer
  • ambient light sensor
  • barometer

Project Status

To Do List

Done List

Misc Issues

  • ALSA config for the device has not been upstreamed yet
  • Issues with 5 GHz wifi
    • Can be worked around by forcing the phone to only use the 2.4 GHz band, for example using nmtui, the network settings of GNOME/Phosh are bit too simplistic for that
  • No idea how to get the call audio on Bluetooth, meaning you will have to hold the phone or use a cable, for now

(This is a non-exhaustive list)

Low Priority

Other than that… Everything should be there. It’s definitely usable already.

Just a few smaller quirks to iron out and two packages to get into the repo.

The Sources (Use The Source, Luke)

Thanks For All The Fish

Huge thanks to be sdm670-linux project and flamingradian who runs the project (just one person!) to make sure the Kernel works on those devices! :)

I don’t know how Kernel development works, so I would have never started porting without this project.

Find that here: https://gitlab.com/sdm670-mainline/linux

Questions Accepted / Ask Me Anything About The Project

I will gladly answer all questions, I hope that more people will start porting if it becomes clear that this is not arcane magic. It’s mostly just arcane. And a community of friendly people that try to be helpful.#

  • erebion@lemmy.sdf.orgOP
    6·
    2 months ago

    Definitely do! It’s a lot of fun and it feels great to have Mobian on the phone instead of having old Android on it or even a phone in the trash and no phone.