TLDNR- Wifi setup to get signal to 25x30 garage 60 feet from house, service comes in first floor 50 feet further from back of house.

Woe is me. Sorry for yet another question.

We have 1000MBps AT&T fiber. Using the Wi-Fi built into the gateway, we barely get a signal to our detached garage.

I failed to add ethernet when I trenched to run electric. Prefer not to because of grounding issues and now there is a sidewalk crossing the backyard.

Currently the fiber connection comes in towards the front of the house. It’s about 50 ft from there to the back of the house. Yard is another 60 ft. Then garage is about 30 ft deep.

Just purchase a set of ASUS XT9 Zenwifi. In testing inside the house I’m only getting around 150 to 160 Mbps on the AT&t gateway Wi-Fi. XT9 is only 100Mbps

If I place the node in the back window of the house, I can get 30Mbps at the closest part of the garage, 10Mbps at the farthest.

Do I need a 3 router system? I could probably run ethernet backhaul to the back of the house, but I don’t know that it will solve the issue.

I tried to talk one of the ATT fiber techs into running me an aerial fiber cable between the two buildings but no dice.

I know a lot of things are on sale right now so hoping I can get advice and get something still on discount.

  • smokedoutpositivesqd@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    CPE710 wireless bridge to connect the two buildings. Then configure the xt9 for wired backhaul using the ethernet cords coming from the CPE710s. You’ll get 700+ mbit assuming you have everything else correct

    • interestingname1@alien.topOPB
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      I made an update post, but I’m not getting 700+ right by the router.

      I will probably go the PTP route, but in that instance are the XT9 overkill? I.E. why mesh if backhaul

      • smokedoutpositivesqd@alien.topB
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        Are you testing these speeds over wifi or over wireless? Wifi clients that will hit close to gigabit speeds are fewer than most people realize. Test it over ethernet to ensure you are getting your full speed at the tap.

        Almost any modern access point system (such as asus’s xt series) can be very reliable solid systems, just have to be wired backhaul. Once you dive into wireless backhaul using A N Y of these companies built in wireless backhaul, you will start to have little gremlins. They work fantastic for what they are, but if you’re in the home networking sub reddit, you are going to get basically the standard of response of “use wifi for things that there is no other option”.