I’m building a house. Floor plan attached if it helps.
I’ve spent the last 3-4 days knee deep reading archived posts, watching youtube, and digesting as much information as possible. Over that time I’ve convinced myself I need a different set up roughly 12 times. Need some direction.
Budget: Not really a consideration. But less is obviously cool.
Background: I’m an enterprise software salesman buy trade, but not a network engineer. And even though I’m willing to roll my sleeves up and do a bit of learning, I really don’t want a massive – and especially not a continuous – project on my hands. I never plan to move again. The house won’t get great cell reception and I’ll be reliant on wifi calling in many cases.
Anticipated Gear List:
- 8-10 POE security cameras/NVR (hardwired)- whole home Sonos kit (16 speakers, 5 amps) (hardwired)- Multiple TVs (hardwired)- a host of IoT devices - hubs, doorbell, thermostat, other automation stuff (hub(s) hardwired)- 2 offices (computers and 1 printer hardwired)- Mesh/access points (hardwired) – this is the million dollar question
My (probably obvious) plan:
- pull all ethernet drops to a centralized location- ISP coax --> modem --> router --> POE switch- terminate all the ethernet cables to logical ports (save the POE ports for the cameras and anything else that needs power)
My Conflict(s):
I’m confident I could get it all installed properly. I’m not confident whatsoever that I could figure out how to deploy it once it was all powered up.
And, as a result, I don’t know what the hell to buy.
It seems Unifi is the default suggestion for most, and while I’m not sure is ISN’T what I’ll end up with, I do think it’s overkill for my specific needs. In our current home I have been running a google mesh and its…fine. It works, it’s not perfect, but it’s simple and essentially never has issues. Maybe I’m lucky or maybe I have very low expectations. I’m convinced I’ll have trouble troubleshooting or fixing things when they inevitably break with unifi - but I could just be psyching myself out.
I’d love to be able to set everything up once – and if I have to mess with it once or twice a year so be it – similar to my current set up.
Could I get away with this?
ISP coax --> ISP’s modem --> (need a router recommendation) --> random POE switch with enough ports to support all my gear? I might also add a UPS and surge protector.
Practically speaking, how would I initially configure/set up everything if I piece meal it together with various OEM gear? Let’s say ISP modem (should I get my own?), TPlink router, Netgear POE switch? Sorry if that’s a dumb question.
Similarly, how much more difficult/easy would a similar Unifi solution be?
Also, sorry for the rant. Struggling with info overload. I dumped so much time into this and have found myself with more questions than I started with.
Processing img 8gh9iutqie3c1…
For each room, cut paper into shaped for various furniture. For example, cut out a bed, dresser, and nightstand for bedrooms. With various configurations, it will then become obvious where cable and network ports are best located.
For example, doing so will make obvious where furniture cannot be so that doors can swing and window access exists.
Also install some plastic pipes, for example, between basement and attic. So that future low voltage wires are easily installed for features we do not yet know we need.
Dedicate a location for all communication, network, and security hardware. With enough AC plugs to power those devices. Bringing all wires to a common point (with a large plywood sheet on that wall for mounting) makes upgrades and debugging much simpler.
AC wired in a manner so that a future generator or power wall can power only items that must always have power.
All incoming TV, network, etc wires must enter a structure at one service entrance. So that all share same earth ground electrodes with AC electric.
Ufer grounds (using rebar) should be installed when footing are poured. Essential for all low voltage cabling.