Ryzen 9 9950x3d and a Powercolor Hellhound 7900XTX in 320x320x153, just over 15.5L

  • nehal3m@lemmy.zip
    link
    fedilink
    English
    arrow-up
    3
    ·
    27 days ago

    Love the retro look. Did it end up structurally solid? What type of materials did you use?

    • A7thStone@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      27 days ago

      Thanks. It’s very solid. I may have gone overboard. The front and sides are 8mm thick so I could make the removable grills 4mm so they wouldn’t be too flimsy. I used PETG plus, but if I did it over I would probably use PLA. I was worried about strength, but PETG does not like to print flat at that size. I’ve had multiple failures, and as it is I still have a lot of sanding and filling to clean it up. It has taken a took of time as well. I bought a large format printer just for this and it just warned me that I should do a 500hr service.

  • Evil_Shrubbery
    link
    fedilink
    English
    arrow-up
    1
    ·
    27 days ago

    I haven’t made my own case with custom water loop (even home made blocks) since the days of single-core CPUs. Ah, nostalgia.

    • A7thStone@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      24 days ago

      It’s my first water cooled setup. I only did it because it let me make it more compact.

    • A7thStone@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      24 days ago

      420x420x500. Microcenter had a Kobra 3 max combo on sale since it’s being replaced by the v2.