Hi printers
I hope this type of post is allowed.
I’m in the process of fixing the stubborn cupholder on my old car, and after finally fixing one issue, another came up. The joys of old plastics…
This tiny cogwheel broke. It works as the dampener, to prevent the cupholder from blasting out when the latch is disengaged. But it’s supposed to be a full circle, not broken as shown.
Is there anyone in France (Haute Savoie would be ideal) who would be willing to print a replacement cog in some sturdy plastic? I’d be happy to pay a little bit. I found stl/skp files from someone who had this issue previously, so it’s a relatively painless job I think, but I don’t have a printer.

Look for maker spaces near you. Odds are you’ll find something relatively close, and someone there will surely be willing to help you.
Yeah, Ch40’s comment made me realize that too, I found a couple I’ll have to check out next week. Thanks for the suggestion!
Locally to me, some libraries have 3D printers now, too. For something simple like this, a library might be a good option.
Libraries might only have PLA, though, which isn’t very resilient against heat or UV. It would likely be the cheapest option, and it seems like the fallout from part failure would be minimal, so maybe with trying anyway?
If they at least have PETG, that would be better, but a “proper” engineering material, like ABS, would be ideal. Those require proper venting and “fancier” printers, though, so you won’t get that at a library.
I’ll have to look into the libraries too, but I see one maker space that has an open door policy on Mon/Tues, so I’ll drop by next week.
Heat and UV aren’t really an issue, but physical stress is. It’s a dampening cog that exists only to slow the movement of a spring-driven cupholder, tucked well away from the elements. I haven’t looked into which plastics would be best for this, the whole post was a bit of a spur of the moment thing after the damn cog broke, hah
Heat is an issue for all parts in a car interior in most places in the world. On a hot summer day, cars are solar ovens. PLA warps at reasonably low temperatures. PETG isn’t perfect, but would likely be more suitable. ABS would be ideal, I think, and a makerspace might be able to do that? idk
Fair, I’ll have a discussion about it when I go check out the makerspace Monday. Thanks for bringing it to my attention, so it doesn’t just end up cracking again a year or two down the line!
Not sure about France, but my local library in rural US has a 3d printer available. Could be worth looking into
Good point, I haven’t looked into this at all around here. I know we had the same options in my little town in Denmark back before I left the country, probably still do
https://www.f6s.com/companies/3d-printing/france/co
here’s a list of french 3d printing companies if you don’t find anyone else
Thanks, that’s pretty handy as a backup!
I would do this for you but I’m not entirely certain how the international logistics would work out.
Yeah, at that point I could buy them from an aftermarket parts manufacturer, it’s just a hefty price tag
Hello, how much are you willing to pay for print + shipment? I have a friend in France who I could ask but I need to know what and how you would pay.
Considering there’s a vendor that sells a replacement for both of these cogs + 2 other pieces prone to breaking for €34, I’d say this one piece is worth €15 to me. Not a lot, I know, but maybe worth it for some





