Hi,

for various reasons i have two routers. (In fact, one is a FritzBox hosting various SmartHome stuff, another is a Speedport from Telekom Germany, that also does the Internet Connection) The WiFi on the FritzBox is also a lot better and right now i don’t have any need to get anything better (all that matters has Rj45 anyway).

This however also is an issue, because i can’t easily host something. I have however a Hetzern Server as well and i have tried some zerotier, but i have failed to set it up correctly. Is there an easier way or has anyone something like an How-To for this that works?

Thanks :)

  • nrezcm@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 year ago

    Do either routers support going into what’s called an AP access mode instead of router? If they do then you could put one into access point mode and run a patch cable between the two.

    You may also be able to load DD-wrt on them but checking https://dd-wrt.com/support/router-database/ it doesn’t look like either have support.

    • nexusband@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      No WRT for either of them and yes, it does support AP Access Mode, but i don’t want to put them in to it, beacuse i actually want the networks to be separate

      • nrezcm@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        So you probably won’t be able to without a router that is capable of supporting VLANs (not just vlan tagging). If you aren’t looking to spend any extra money and have an old computer lying around you could look at getting a multi port network card and running pFsense/OPNSense as an inexpensive alternative.

        • nexusband@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I have VLANs, but they are more or less switch based and there are no direct routes between them. The basic gist of it is, Telekom switches back to DSL only, if it detects VPN traffic. And that’s only 2 Mbit/s upload. However, with the 5G Hybrid and SSL Connections on Port 443 i do get the full 60-90 Mbit/s upload. I could just put the Telekom router in my “main” network and have it be the Gateway, but that doesn’t go well with some devices i have.

          • nrezcm@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Yeah it sounds like you’re still going to need something that can support VLAN routing not just hard coded VLANs or isolated guest networks. If one of your other devices happens to be a desktop that you can run a small VM on you could potentially run pFsense as a VM then buy a 2 or 4 port gigabit pcie card as a stop gap until you find a better solution. You could even do the same with a laptop and say a USB ethernet adapter or two. Neither of those options would be better than having a dedicated device acting as the router though.

            You might also be able to something with say a cheap managed TP link switch but that would really depend I think on what the rest of the network is doing.

  • Lyxea@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 year ago

    your secondary router should have an option for change the mode to “bridge mode” in this way doesnt create any problems for create your self-hosted system so take a look in your secondary router configuration,almost all TP-Link Routers have that choice

  • meli nasa@feddit.de
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    I don’t really understand the problem here. Do these routers each have their own internet connection? Why can’t you just attach whatever device you are using to host stuff to one of them, configure your router for port forwarding, and be done? To get a domain name for free, you can use https://www.noip.com/.

    If that mysteriously doesn’t work, you might want to investigate if your internet provider uses CGNAT (mine does). In that case, you might be able to contact them so they’ll turn it off for you. I don’t know about Germany, but in Austria they have to comply with your request, by law.

    If you can’t do that or don’t want to expose your device to the internet directly, you have other options depending on whether you want your stuff to be public or not. For private services setting up WireGuard using wg-quick (on your Hetzner server) is really easy, reliable, and very secure. For public stuff, you might want to look at one of the services listed here. I recommend Cloudflare Tunnel, though it’s only meant for web stuff, no gameservers etc.

    Feel free to ask for more help if you need more details.

    • nexusband@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      The basic gist of it is, Telekom switches back to DSL only, if it detects VPN traffic. And that’s only 2 Mbit/s upload. However, with the 5G Hybrid and SSL Connections on Port 443 i do get the full 60-90 Mbit/s upload. I could just put the Telekom router in my “main” network and have it be the Gateway, but that doesn’t go well with some devices i have.

      I don’t really want to host stuff, i’m fine with having to make a connection (like WireGuard or a VPN), but if i do it directly, i only get DSL Speeds, because WireGuard is also “detected” now. Everything that’s not Port 443 or Port 80 get’s routed over DSL…

      • meli nasa@feddit.de
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        1 year ago

        Ugh, internet providers are annoying. Why is stuff like that even legal.

        For situations like this I’ve had success with Shadowsocks, which you can combine with Wireguard, and run over Port 443, here’s a guide.

        You could also try if it’s sufficient to just run vanilla Wireguard over port 443.

        Edit: One issue you might run into with Shadowsocks is that combining it with Wireguard is not possible on mobile AFAIK.

  • JASN_DE@feddit.de
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    This however also is an issue, because i can’t easily host something.

    Why not? Or rather, to which router do your servers connect, the FB or the Speedport? Or because you’re on DS-lite or CG-NAT and don’t have a “direct” external IP?

    • nexusband@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      The Speedport via 5G Hybrid. Neither DS-Lite nor CG-NAT. I have a direct tunnel exit IP, which i could also use as external, but i do want to have two different networks, however i want to tunnel from the FB Network to an external exit point (like the Hetzner router)

      Zerotier apparently can do that, i have not been able to set it up though. The connection works, but for whatever reason i can’t really get any incoming Data to be routed back to the corresponding server.