SpaceX Starship page

FAQ

  1. When (first) orbital flight? First integrated flight test occurred April 20, 2023. “The vehicle cleared the pad and beach as Starship climbed to an apogee of ~39 km over the Gulf of Mexico – the highest of any Starship to-date. The vehicle experienced multiple engines out during the flight test, lost altitude, and began to tumble. The flight termination system was commanded on both the booster and ship.”
  2. Where can I find streams of the launch? SpaceX Full Livestream. NASASpaceFlight Channel. Lab Padre Channel. Everyday Astronaut Channel.
  3. What’s happening next? SpaceX has assessed damage to Stage 0 and is implementing fixes and changes including a water deluge/pad protection/“shower head” system. No major repairs to key structures appear to be necessary.
  4. When is the next flight test? Just after flight, Elon stated they “Learned a lot for next test launch in a few months.” On April 29, he reiterated this estimate in a Twitter Spaces Q&A (summarized here), saying “I’m glad to report that the pad damage is actually quite small,” should “be repaired quickly,” and “From a pad standpoint, we are probably ready to launch in 6 to 8 weeks.” Requalifying the flight termination system (FTS) and the FAA post-incident review will likely require the longest time to complete. Musk reiterated the timeline on May 26, stating “Major launchpad upgrades should be complete in about a month, then another month of rocket testing on pad, then flight 2 of Starship.”
  5. Why no flame diverter/flame trench below the OLM? Musk tweeted on April 21: “3 months ago, we started building a massive water-cooled, steel plate to go under the launch mount. Wasn’t ready in time & we wrongly thought, based on static fire data, that Fondag would make it through 1 launch.” Regarding a trench, note that the Starship on the OLM sits 2.5x higher off the ground than the Saturn V sat above the base of its flame trench, and the OLM has 6 exits vs. 2 on the Saturn V trench.

Quick Links

RAPTOR ROOST | LAB CAM | SAPPHIRE CAM | SENTINEL CAM | ROVER CAM | ROVER 2.0 CAM | PLEX CAM | NSF STARBASE

Relevant Reddit threads (though these likely won’t be accessible during the blackout).

Starship Dev 46 | Starship Dev 45 | Starship Dev 44 | Starship Dev 43 | Starship Thread List

Official Starship Update | r/SpaceX Update Thread


Status

Road Closures

No road closures currently scheduled

No transportation delays currently scheduled

Up to date as of 2023-07-09


Resources

I’ll attempt to keep this post current with links and major updates, but would be greatly helped by information supplied by the community. I hope this can be an alternate place to discuss Starship development. While the Starship Development Threads on Reddit are not party threads, Lemmy is still small enough that I don’t imagine that strict moderation will be needed in the short term.

    • LettuceTurnipTheBeet@lemm.ee
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      I’m really impressed by how quickly the plate is getting assembled. I didn’t expect the manifolds to get added for another week or so, and now they’re at 2 / 3.

      I’m not sure what the bottleneck is at the moment. Once everything is lifted in place they can move B9 over, but they might want to wait until they hit stage adapter is added.

      B9 could go through spin prime tests without the plane being ready, and the plate can get tested without all deluge water & gas tanks present. We’re also it sure how far along the other OLM repairs are (cryo pipes are still being replaced). So there’s a ton of stuff happening in parallel.

      • John_Hasler@lemmy.one
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        Musk said that he thought that FAA approval of a new FTS design was likely to be the long pole.

  • LettuceTurnipTheBeet@lemm.ee
    link
    fedilink
    English
    arrow-up
    6
    ·
    edit-2
    1 year ago

    New comment from /u/santacfan on Reddit:

    Starbase live-

    8:57am- Black pipe lifted over towards the dog house area (most likely a cryo pipe but couldn’t tell for sure)

    9:07am- LR11000 moves a deluge pipe. Lifted over to the work area by where the deluge stand is parked

    9:30am- Second deluge pipe lifted. Moved to the same area

    9:54am- 3rd deluge pipe moved

    10:12am-4th deluge pipe moved (So apparently all of the pipes they moved to the side a couple weeks ago, they’re moving back over to be worked on)

    10:20am- Looks like all of the boards have been removed and now they are starting to remove the metal poles of the scaffolding below the OLM.

    10:26am- 5th deluge pipe moved. Crane didn’t swing back over this time so the Y pipe looks like it will stay in it’s current position

    12:15pm- Scaffolding continues to be removed

    2:15pm- Crane is starting to use the bucket to lift loads off of the top of the OLM as well as underneath.

    5:15pm- Crane has lowered and left the OLM area. The 2 man lifts that have been working on the scaffolding have also lowered. Work continues around the base of the OLM.

    6:30pm- Crane and man lift back up working on the BQD side of the OLM

    9:15pm- Fireworks

    9:25pm- SPI fireworks

    (This gets synced)

    • LettuceTurnipTheBeet@lemm.ee
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      I guess I expected today to be a slow day, allowing the concrete to set and with it being a holiday and all.

      But nope, full steam ahead. I wonder when they’ll be ready to move that giant plate in?

  • LettuceTurnipTheBeet@lemm.ee
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    1 year ago

    New comment from /u/santacfan on Reddit:

    Starbase live-

    11:56pm- 2nd manifold is lifted off it’s stand (Who needs sleep anyways)

    12:12am- Manifold is going up after some weight was added to balance the load

    12:14:40am- Starts to swing over

    12:18am- Lowering. This should go to the left of the plate installed earlier

    12:23am- Trying to get it aligned

    12:25am- Starting to bring it in closer to the OLM

    12:31am- Lowered a bit more. (Looks like they’re at the 10ft mark where they paused for quite a while earlier. So I’m off to bed)

    12:45am- Lowered into place.

    1:21am- Raised again

    1:50am- B10 turns into Massey’s

    2:01am- Manifold is lowered again

    2:20am- Manifold go up, Basket go down

    2:25am- Manifold goes down

    2:36am- Basket goes up

    2:59am- Basket goes down

    3:35am- Small crane swings what may have been the 3rd manifold into place under the OLM

    3:51am- Grover moves a piece of small diameter pipe over to the left side of the OLM where the excavators are working

    5:30am- LR11000 is disconnected from the manifold section

    8:10am- Day shift off to a slow start

    9:25am- White pipe is lifted by a small crane over by the berm. RGV’s pictures show that they might be running a new water line from the current vertical tank over to the OLM.

    9:32am- LR11000 lifts the counterweight that was used to keep the last manifold level during the lift

    11:04am- Basket goes up

    11:21am- Retaining wall goes up where they’ve been excavating

    11:24am- Basket goes down

    11:36am- 2 workers carry a plastic pipe over to the pit being dug by the long reach excavator (if it’s metal, enter those guys in a body building competition)

    11:55am- 2 dump truck loads of gravel dumped on the other side of the excavator

    12:00pm- Nic is leaving NSF

    12:53pm- Basket goes up

    1:06pm- Basket goes down

    1:24pm- Grover lifts a couple pieces of metal off of the top of the OLM

    1:40pm- LR11000 moves another counterweight away from the OLM

    2:11pm- LR11000 lifts another counterweight

    2:17pm- Small crane lifts a piece of metal out of the excavation pit

    2:53pm- In todays adventure of what’s stuck at Starbase. We have a small bulldozer hanging off the side of a low boy trailer.

    2:53:54- Random kid says hi

    2:58pm- The excavator wins again. Bulldozer is on the trailer.

    3:34pm- Grover moves what looks like a long straight piece of rebar over to the cryo pit area

    3:49pm- Grover lifts a triangular piece of metal to the top of the OLM.

    4:13pm- Grover lifts another triangular piece of metal to the top of the OLM.

    4:30pm- Grover lifts more rebar over for the cryo pit lid

    4:50pm- Basket goes up (to the door on the side of the OLM)

    5:02pm- Rocket cows hack the stream

    5:03pm- Basket goes down

    5:37pm- Basket goes up

    5:44pm- Basket goes down

    6:32pm- LR11000 picks up a deluge pipe

    6:51pm- Grover swings out of the way

    6:57pm- LR11000 Starts swinging deluge pipe over. Straight pipe with a curve on the end closest to the OLM.

    6:59pm- Starts lowering pipe to the back left side OLM

    7:47pm- Small crane lifts a short piece of pipe next to the bigger piece the LR11000 lifted over

    7:51pm- Short piece swung back away

    9:00pm- Looks like some work on the lid for the cryo pipe vault. Some people going in and out of the ring around the OLM. They’re hiding what we really want to see behind the tarps though.

    9:15pm- LR11000 moves to pick up Y pipe

    9:41pm- Lifting straps connected to the crane

    9:56pm- Y pipe lifted

    9:58pm- Swung around the OLM

    10:06pm- Lowered to just above the OLM

    10:08pm- Guide rope got stuck on smaller crane. Had to go back up.

    10:09pm- Going back down

    10:12pm- Sat on the ground right outside the pit.

    10:14pm- Lifted Up slightly and rotated

    10:15pm- Lowered into the pit

    10:25pm- For those wanting to keep track, In Ryan’s renders, we’ve seen the bottom pipe that goes to the middle manifold and the Y section that goes over it lifted in so far. There should be 2 short pieces next to connect the Y to the other 2 manifolds.

    (This gets synced)

  • LettuceTurnipTheBeet@lemm.ee
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    1 year ago

    Exciting stuff happening right now (See Starbase Live).

    edit: And here’s the latest RGV Flyover video, which is the flyover from last week. Interesting content, but already heavily out of date.

    • threelonmusketeers@sh.itjust.worksOPM
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 year ago

      Sounds good. Would you like to do the honours, or shall I?

      The Reddit Starship Dev thread is semi-publicly editable by via a Reddit wiki page. Do you know if Lemmy has similar tools? Some way for multiple people to update the post would certainly be useful…

      Edit: I have created a new thread.

  • LettuceTurnipTheBeet@lemm.ee
    link
    fedilink
    English
    arrow-up
    4
    ·
    edit-2
    1 year ago

    New comment from /u/santacfan on Reddit:

    Starbase Live-

    5:32pm- Plate starts to be lifted off of the moving jig

    5:34pm- SPMT starts rolling out from under OLM

    5:36:30m- Plate starts to be lowered

    5:40pm- Plate starts to be tilted to horizontal

    5:48pm- It’s a little close on one corner. Pulling on those guide ropes a little harder

    5:54pm- People are walking on the plate

    5:56- Looks like they might be measuring the gaps between the plate and legs. Still tension on the lifting straps

    5:59pm- SPMT with moving rig is rolling back to the build site. (So strike that as a possibility for tomorrow’s closure)

    6:00pm- Slack on the lifting cables. Officially down

    7:56pm- Plate lifted back up a couple of feet

    8:02pm- Plate lowered

    8:05pm- Plate raised again. Stands placed around edges.

    8:39pm- Plate raising even higher

    9:08pm- Forklift bringing in even higher stands

    (This gets synced)

  • pigeonberry@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    More pour info, this time from tweets from Zack Golden @CSI_Starbase. The truck counts basically match those from @[email protected]’s post earlier.

    SpaceX has received their final load of concrete for today’s Orbital Launch Mount foundation work. Here are the totals after the 15.3 hour marathon:

    June 25th - 132 Truck loads

    July 3rd - 171 Truck loads

    Total Volume = 2,302 m^3 = 3030 yd^3

    Total Weight = 5,411 Tons

    For reference, a Fully loaded Starship ~ 5,000 Tons

    Note: There were 4 additional trucks that showed up but were turned back around without offloading.

    Shoutout to agents @VickiCocks15 and @SpmtTracker for keeping track of all these.

    4:11 PM · Jul 3, 2023

    and

    Obviously this number is significantly greater than we predicted. For those who asked, that previous number was not considering the area in yellow, which were also completed today. This area is technically outside of the true foundation of the OLM

    with a picture by RGV Aerial Photography.

  • LettuceTurnipTheBeet@lemm.ee
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    The big plate is on the transport stand and moving under the OLM as we speak.

    That was quick! I thought the concrete would have to set a bit longer before taking such a load but apparently not.

  • pigeonberry@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    #To repeat, new pinned thread:

    Thread 47

    As @clothes on lemmy.world pointed out: for some reason, via lemmy.world, this 46B thread is still pinned and there’s no sign of 47.

  • LettuceTurnipTheBeet@lemm.ee
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    1 year ago

    New comment from /u/santacfan on Reddit:

    Starbase Live-

    7:11am- Grover starts to wake up

    7:13am- Dance floor drives under OLM

    7:22am- Dance floor wings unfolded

    7:23am- Grover delivers a cryo pipe over to the doghouse area

    7:24am- Dance floor raised into position

    7:38am- LR11000 looks like it’s hooked to a manifold

    8:23am- Grover delivers another cryo pipe. This time partly up the leg where the cryo pipes run. Looks like they are replacing them through the access holes

    9:15am- Lots of concrete being broke up and hauled away by a front end loader

    9:39am- The extended reach excavator that had been working in the area where the deluge pipes will go, left.

    9:55am- Grover lifts the yellow basket normally used to take down scaffolding to the top of the OLM.

    10:33am- Yellow basket brought down

    12:00pm- All is quiet on the southern front. Pretty slow day after the last couple.

    1:01pm- Grover lifts the yellow basket back up to the OLM

    1:31pm- Basket comes down

    1:43pm- Basket goes back up

    1:46pm- Basket comes back down

    1:56pm- Basket goes up

    2:02pm- Basket go down

    2:07pm- Basket go up

    2:15pm- Basket go down

    2:30pm- First piece of level 4 for the new mega bay is lifted

    2:47pm- Basket go up

    2:55pm- Basket go down

    3:09pm- Grover lifts a load of something metal up to the top of the OLM

    3:25pm- Grover lifts a 2nd load to the top of the OLM

    3:42pm- Grover lifts a 3rd load to the top of the OLM

    4:07pm- Long reach excavator returns

    5:50pm- The LR11000 took tension on the lifting straps that have been connected to the manifold piece all day.

    6:24pm- Manifold is lifted

    6:25pm- Crane starts swinging towards the OLM

    6:29pm- Goes flying over the OLM

    6:31pm- Starts lowering

    6:34pm- Starts swinging towards bottom of OLM

    6:48pm- When looking head on from SBL, it looks like it’s going to the left side of the BQD. So this is the middle manifold. Which based on Ryan’s renders makes sense because the pipe for the far right manifold will run over the pipe for this one

    7:06pm- Holding about 10ft above the pad

    7:10pm- Starting to tilt the backside down into place

    7:30pm- Level it back out and holding around 10ft

    7:50pm- Lowered down some more but behind stuff now. Still tension on the straps

    7:51pm- B10 starts rolling from the rocket garden

    8:16pm- Manifold is raised back up

    8:18pm- B10 staged at the end of Remidos

    8:21pm- Manifold lowered back down and swung in closer to the pad

    8:25pm- Grinding by the doghouse area

    8:50pm- Lifting straps on the manifold went slack for a second before they went taunt again. So the plate may be close to/all the way down but the LR11000 still has the weight. If only those tarps weren’t there.

    9:00pm- Speaking of the tarps, that area of the plate is where one section of the plugs were. Ryan theorized that they’ll be adding extensions on to these areas… So that might be what’s happening on the other side. We can definitely see some welding going on

    9:20pm- 2 small excavators are working on digging a trench for a small pipe

    10:27pm- B10 is rolling.

    10:33pm- Turns on to hwy 4

    10:40pm- They see me rollin, down highway 4, I know they’re all jealous, because I’m off to get all white and frosty. I’m going to get all white and frosty, I’m going to get all white and frosty, wait until you see me all white and frosty, going to look really cold all white and frosty. (Weird Al I am not but Hey it’s been a long day, I’ve got to entertain myself somehow)

    11:10pm- 128 wheels tonight. So they added 1 section to each line of SPMT’s after delivering the manifolds.

    11:19pm- Time for a break. (Someone read it my version of White and Nerdy and now it refuses to go any further until I delete it)

    11:22pm- While we were watching the big shiny thing drive down the road, the LR11000 was unhooked from the manifold section. (It happened at 23:19 on Rover 2)

    11:32pm- Straps being hooked to the next manifold piece

    11:39pm- B10 is rolling again

    11:40pm- Someone didn’t make sure their swing path was clear. Grover swings into one of the cages holding the high pressure gas bottles nearly knocking 2 cages over.

    11:47pm- Forklift arrives to move the cages

    11:48pm- And just what was Grover doing while this was happening, that’s right,

    Basket go down

    (This gets synced)