Built out my ploopy mouse today, it’s been sitting on my shelf for a while. I got the self-assembly kit, had to solder on one through hole component.
So far I’m enjoying the mouse, the right mouse button is a little sticky, but I’m sure with a little readjustment it’ll fall into place.
Every part of this mouse is open source, the hardware files, the PCB, the schematic, the firmware which is QMK. There’s a lot to love here.
I’ve been playing some video games, and so far I enjoy the mouse quite a bit.
If I do have one complaint it would be the central scroll wheel doesn’t have a detent, but that might just take some getting used to
I would love to see a kinesis style pinch mouse like the DXT2.
@[email protected] @[email protected] Great device, thank you for making it open source.
Note: I ordered their USB cables, just for solidarity, and assuming they found a cable that was very effective for a mouse, the cables I received were very strong, too stiff really to be used for a mouse cable. Luckily I had some very flexible braided USB cables already. So if you’re going to order from them do not order the USB cable
You must log in or register to comment.
Nice!
You didn’t print the plastic parts yourself, did you? Just bought them? (Still cool that they print them with off-the-shelf consumer printers.)
Also, what’s “detent?” Is that the ratcheted-ish feel where it kindof sticks in regularly-spaced spots? (If that makes any sense. Lol.)
I did not print it myself no, The printed parts came with the kit. But I am free to print them again if I want to
I looked at doing it all myself, I priced out the PCB at PCB way, for run of five(minimum order size) it cost me $125. The mouse itself with all the bits and pieces is $100. So I just went with the kit
Yeah the ratcheting feeling when you move a mouse wheel on some mice is nice. But I’m getting used to this infinite wheel paradigm
https://github.com/ploopyco/mouse/wiki/Ploopy-Mouse-Kit-Assembly
This is what I did today basically. I followed these assembly instructions.
a detent is a mechanism that latches something in position usually using some form of spring force and a notch/cutout. there are many different kinds. one that comes to mind is the detent ball in the sqaure drive of a ratchet (tool).
I have been looking at these and thinking it may be my next mouse. Never soldered anything before, but I bought a cheap soldering iron starter kit thing from Amazon awhile ago I’m up for giving it a shot, especially if you said there’s only one spot you have to solder.
How does it feel to use? Sufficiently ergo? Do the layer lines feel weird? I feel like not being totally smooth might kinda grate on me after awhile.
I wonder if you could source a clicky mouse wheel from somewhere as a drop in replacement? My Logitech mouse has a button to turn the detent on/off and I definitely prefer it on, the free spin way just feels wrong somehow. The detent part must be physical, there shouldn’t be any electrical difference I wouldn’t think, so one ought to work as well as the other.
Feels a little heavier then my last mouse. The ergonomics are fine, gamed for a few hours without any issue.
The layer lines feel like extra grip, I don’t even notice them when using the mouse. You can always print a different shell, or use a professional print house to make a metal shell.
