Does anyone have any thoughts on this failure? I’m curious what the typical inspection schedule and process is for a roller coaster like this.

I’m also curious about the root cause of the failure. I have a guess, but it would be interesting to see an actual failure report. I don’t expect to see it in the news, though.

Here is a video of the crack moving as roller coaster cars go by.

Someone also got a photo of the crack a week prior before it had fully propagated through the support.

  • Captain Aggravated@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    The Wikipedia article for the coaster says the crack started along the weld line, so my current hypothesis is a faulty weld.

    I know I’m just an out-of-work aircraft repairman so the next thing I’m going to say is probably insane, but if it were my roller coaster I wouldn’t re-open it to guests until I’d replaced that support column and done some NDT on that section of track as well as all the other support columns. I’d likely have nightmares for years about some weld somewhere failing. See why I don’t work on planes anymore?

    • HobbitFoot
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      You aren’t wrong, but they are also going to need to verify the fatigue design of that detail. That connection detail is rather rigid, so the model they used for the design of that weld may not have accurately modeled the stress at that weld.

      This is the kind of issue someone can get a PhD trying to solve.