Lather: Spearhead Shaving Company - Seaforth! Black Watch - Soap
Post Shave: Spearhead Shaving Company - Seaforth! Black Watch - Aftershave
Post Shave: Thayers - Cucumber - Toner
Fragrance: Spearhead Shaving Company - Seaforth! Black Watch - Eau de Toilette
Of course I’m recognizing Black Watchday. Going with a black theme as suggested by @[email protected] . You can’t fault this setup.
Later today, I’ll be shave testing my Friodur 472 on which I did an edge refresh. I made a video on honing it, but it is my first sharpening video, so it is pretty bad; long and probably boring. I learned a lot, though [mostly, the lesson is “don’t make videos”]. This was done as practice for a video I’ve been asked to make on sharpening my Iwasaki razor. I want to be comfortable with the process before I do that one.
I can’t watch the video yet, but I was impatient and already fast forwarded through without sound to get the gist and noted that you don’t do the trailing edge strikes anymore. Looking forward to watching it with sound later to hear your comments!
My own 472 is currently out on loan or I would be tempted join in a 472 second luxury shave 😅
I have never honed razors with just trailing edge strokes, but I added a trailing edge component to my half strokes. Traditional Japanese knives are normally sharpened with trailing edge pressure, and some heavily recurved knife blades require it too. So I have done it; just not with razors.
Great composition on that picture BTW! 😊
Yeah, the idea just presented itself as I was looking through SOTDs earlier today ;-)
I have never honed razors with just trailing edge strokes, but I added a trailing edge component to my half strokes.
I’m half convinced my edges are better since I’ve switched to trailing edge strokes only, followed by deburring on loaded canvas. At the same time, I’m so new to honing that this doesn’t mean much 😄
November 1, 2023
Brush: Wald Stratos Goldvein 29mm A1 Fan
Razor: C.V. Heljestrand MK 10 13/16 Half Hollow Square Point (Straight Shave 364)
Lather: Spearhead Shaving Company - Seaforth! Black Watch - Soap
Post Shave: Spearhead Shaving Company - Seaforth! Black Watch - Aftershave
Post Shave: Thayers - Cucumber - Toner
Fragrance: Spearhead Shaving Company - Seaforth! Black Watch - Eau de Toilette
Of course I’m recognizing Black Watchday. Going with a black theme as suggested by @[email protected] . You can’t fault this setup.
Later today, I’ll be shave testing my Friodur 472 on which I did an edge refresh. I made a video on honing it, but it is my first sharpening video, so it is pretty bad; long and probably boring. I learned a lot, though [mostly, the lesson is “don’t make videos”]. This was done as practice for a video I’ve been asked to make on sharpening my Iwasaki razor. I want to be comfortable with the process before I do that one.
Black Watch++;
MK N°10++;
Happy Black Watchday to you too! 😊
I can’t watch the video yet, but I was impatient and already fast forwarded through without sound to get the gist and noted that you don’t do the trailing edge strikes anymore. Looking forward to watching it with sound later to hear your comments!
My own 472 is currently out on loan or I would be tempted join in a 472 second luxury shave 😅
Great composition on that picture BTW! 😊
I have never honed razors with just trailing edge strokes, but I added a trailing edge component to my half strokes. Traditional Japanese knives are normally sharpened with trailing edge pressure, and some heavily recurved knife blades require it too. So I have done it; just not with razors.
Yeah, the idea just presented itself as I was looking through SOTDs earlier today ;-)
I’m half convinced my edges are better since I’ve switched to trailing edge strokes only, followed by deburring on loaded canvas. At the same time, I’m so new to honing that this doesn’t mean much 😄
As you know, Todd at Science of Sharp makes a very good case for using your method.