White House threatens to veto anti-EV bill just passed by US House::The bill would prevent the EPA from enforcing tougher new pollution standards.

  • ColeSloth@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    17
    ·
    7 months ago

    My maintenance costs per year would be about $200 not counting tires. But I do all my own work and vet my vehicles well before purchasing them. Most people’s would be higher, though, since most don’t do their own work.

    But in comparison to all electrics, the savings aren’t as much as you’re thinking. There’s still a huge load of things that can/will break down on an electric. Shocks, struts, wheel bearings moreso than an ice vehicle.

    To give an example, I’ll use the 3rd most sold all electric of last year; the mustang mach-e. I’m skipping the first two because they’re teslas and absolutely ridiculous in high prices to get parts for.

    I’ll start things off with the worst one.

    So the battery itself (I’m looking these up as I go) is a holy shit $23,000 just for the part itself and only has a 100,000 mile warranty that it will have at least 70% capacity from when you buy the vehicle new. Wow, would that absolutely suck. You can buy new ice engines and have them installed for you for under $10,000. Way under in many cases.

    Looks like the electric motor itself is around $4,000 if you got the all wheel drive version you have two of these to worry about. Then theres the inverters for the motors. Those are $1,700 a piece. I’m not traking down prices for the rest of this stuff. You get the idea.

    You still have a single gear transmission to worry about that needs fluid changes.

    Also antifreeze and a pump.

    Brakes and brake fluid

    Calipers

    Several different control modules

    Sensors

    Etc etc.

    Basically your maintenance free stuff that you don’t have to do to an electric you do have to mess with on an ice consists of plugs, ignition coils, serpentine belt, oil, injectors, fuel pump, and a timing belt if you got a vehicle with a belt and not a chain, throttle body, air filter and a few sensors. Aside from the oil and air filter, most of that stuff are things that need addressed every 80,000 miles or if they break.

    That’s close to about it on what you no longer need to mess with. An electrics transmission should almost never break down so long as it’s fluid gets changed, at least. They’re quite simple bits.

    So most “maintenance” and upkeep still exists for electrics. You just don’t have to spend 30 minutes changing oil every 4 to 8 thousand miles. There’s also a lot of extra that can break and cost a lot to fix on an electric. Then other things that break faster.

    While most of your big ticket items like the electric motors and the inverters are left to a chance at going out, just like a chance of an ice blowing a rod out. It’s an absolute fact that your evs battery will die and that every single month that goes along you’ll get less and less capacity.

    You want to save the environment? Instead of being forced to spend thousands more on an electric vehicle, buying a small ice vehicle and taking the $10k you saved and installing solar panels to your houses roof will do more.

    • dumpsterlid@lemmy.world
      link
      fedilink
      English
      arrow-up
      7
      arrow-down
      1
      ·
      7 months ago

      The prices to those parts don’t seem that absurd especially given how the EV maintenance and parts market is still fairly new.?

    • RubberElectrons@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      7 months ago

      Nope, all moronic attempts at making a fairly robust assembly look shaky and expensive. Shame on you colonSloth.

      We engineers always use a factor of safety in our design work, so your talk about inverters (which you obviously don’t understand), motors (also don’t understand it’s reliability)… You’re basically listing a parts list for the mach-e from most to least expensive parts.

      If/when a battery assembly wears out to needing replacement, most of everything else should still be working fine. You may need to replace the fluid pump, brakes, maybe even a wheel bearing. Throwing words in like “control modules” as though they fail frequently is as big a joke as you are.

      Answer this, knucklehead: when you visit a factory, with many many pumps and moving machinery, operating 24/7 365, are they using a combustion engine as the prime mover for all this equipment, where reliability is Paramount?