Right now it’s just flicking on and off at an infuriating interval. I assume it’s supposed to sense motion but there’s no real motion happening. Maybe it’s just broken but I’m hoping I just don’t know how to use it and one of you does.

When I press the side buttons those green lights seem to go up or down. None of the other buttons appear to do anything.

Update: idk how it didn’t occur to me to just cover it but that’s night 3/3 12s for ya.

  • Schwim Dandy@piefed.zip
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 hour ago

    It’s a motion sensing switch, the buttons on the left should adjust how long the light remains on after motion is last detected.

  • AbidingOhmsLaw@lemmy.ml
    link
    fedilink
    English
    arrow-up
    2
    ·
    27 minutes ago

    Side buttons are a dimmer, big button next to side buttons is a toggle, top for light on, bottom for lights off small rectangle on bottom is the motion sensor, motion sensativity settings are under the switch plate. Lights flickering could be faulty switch or non dimable LED bulbs used with a dimmer. Pushing the bottom of the big button and holding it down for a few seconds should turn off the light and deactivate the motion sensor “auto on”

  • CerebralHawks@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    3
    ·
    43 minutes ago

    Are those secure torx screws or whatever they’re called? Those aren’t common. They really don’t want you removing that. The driver is kinda hollow with a star or hex shape.

    • Apytele@sh.itjust.worksOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      38 minutes ago

      Yes, they are. I also don’t want anyone removing it right now, LOL, although I’ve seen people manage it with tools made out of broken combs, toothbrushes, etc.

      • IMALlama@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        29 minutes ago

        I realized I’m probably replying a bit too much here, but I had another idea. These switches work by sensing rapid changes in heat level. Putting nearly anything over the switch/sensor will prevent it - a piece of paper, a towel, etc. If the switch is sensing something in a weird way that could put a stop to it.

  • IMALlama@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    35 minutes ago

    After reading a few of the replies, plus your own: if your goal is to get the light(s) to turn off temporarily, it will likely be easier to disconnect them if you don’t have a security torx bit on hand. What kind of light(s) are you looking at?

  • AlternatePersonMan@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 hour ago

    I used to work in an office with shitty motion sensing lights. They would constantly turn off if only one or two people were in the room.

    I managed to find the general model online and from there I was able to reprogram the lights to stay on at least 15 minutes.

  • TrackenDaKracken@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 hour ago

    It’s not worth worrying about or fussing over. Replacing a switch is an easy task, all you need is a screwdriver. Then you’ll have what you want, it will work, and you can toss this thing. Go buy a switch you like, watch a video or two on how to do it, TURN OFF THE BREAKER, and replace the switch. It will take all of 10 minutes if you go slow.

    • Apytele@sh.itjust.worksOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      46 minutes ago

      Don’t have access to any of that and opening it at this time would be… unsafe. Work order is already in but they won’t be here until tomorrow and that doesn’t help the person trying to sleep near it.

      • Fermion@feddit.nl
        link
        fedilink
        English
        arrow-up
        3
        ·
        42 minutes ago

        Have you tried covering it up with something for the time being so it can’t detect any movement?

        Otherwise I would check to see if any other switches cut power to that circuit. It would be unusual to not have any way of switching a light off completely.

      • IMALlama@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        2
        ·
        33 minutes ago

        unsafe

        I’m in the Us and while I would not call 110 VAC safe it’s very unlikely to do any kind of lasting harm. Don’t grab the both sides of the circuit with opposite hands, have dry hands, don’t wearing metal, etc and you’ll be fine. If you’re able to get the screws off you’ll only need to remove the neutral wire. This wire should not be carrying any voltage.