None of this is true - I never used cast iron in my life…
The best pan is the $20 no name stainless steel pan from a restaurant supply store. Cast iron is for Dutch ovens that need to retain heat for stews and curries and shit. Anyone that genuinely prefers cast iron over stainless just doesn’t know how to preheat a pan and use cold oil. “Oh I want a pan that requires ongoing maintenance, can never be properly cleaned, isn’t actually non stick at all, and weighs 900 pounds so doing any kind of toss is a total pain in the ass”
why use a forever pan when you can have forever chemicals?
My cast iron cookware exists out of survivors bias. Everything else has fallen apart in one capacity or another.
Sure, but everything else has fallen apart because I use them frequently. My cast iron pans sit in the back of the cupboard because it’s heavy and things stick, so I might as well use something lighter.
If things are sticking to your cast iron it needs to be better maintained. Properly cleaned and seasoned cast irons don’t stick
The quick and dirty way is to wipe that bitch down with canola oil and bake it on high for about 30 minutes.
I don’t even do that any more. I just make sure they pan is oiled and at a decent heat before putting food on it. Putting food on a cold pan will not end well, unless it’s really well maintained (and I am very lazy).
Thanks, I’ll try it out.
I had a housemate who fried sausage patties and eggs in my cast iron skillet every morning for a couple of years. Gave it a good wipe and that’s it. I’d cook other things in it sometimes and wash it up if needed. The seasoning on that thing developed into a deep black that was so smooth you see your reflection in it and you could fry an egg without oil and it came off clean with just a nudge from the spatula. It was beautiful.
We went our separate ways and it quickly degraded back to a more normal “good enough” level of seasoning. It was great, but I’m not frying up a fancy breakfast every morning for it.
i tried cast iron pans many summers ago. but i found myself never using it because cooking is already inconvenient enough and cast iron pans just add a whole other dimension of inconvenience. it also makes me nervous that they’re never/rarely ever cleaned with soap and water. it was also very difficult to find consistent instructions on how to care for them and use them safely. so now i just use stainless steel instead.
I’m a stainless steel enjoyer. Get that cast iron and teflon shit out of here.
I find they’re the same. You just have to oil them and use them regularly.
wood and stainless steel is definitely the way to go. i don’t understand how nonstick seems to be the norm. are people not aware that the “nonstick” part of their pans is basically just plastic? and that it’s generally a bad idea to cook/eat/scratch plastic things?
Let me add to your comment…
“PFAS filled Teflon shit out of here.”
Most of this is true, I’ve never used cast iron in my life
Some of this is cast iron, I’ve been true my whole life.
True is some of this, I’ve been cast iron my whole life.
True iron is some of this, I’ve been cast my whole life.
My whole life is cast iron. I’ve been true for some of this.
Cast iron life been true. I’ve my is of this for whole.
Bames Nond’s having a stronk, call a Bondulance.
That’s a skill issue. Get better.
*skillet issue
make me
Cue montage of hard work being done over an energetic Kenny Loggins song
🍳🍳🍳🍳🍳
+15XP
I’ll make you bb
I talked to your parents and they told me to tell you to get better.
I bought a $20 cast iron pan at target, I season it like once a year. I just wash it and make sure to dry it, I’m sure this is against the rules. Seems to work fine for me though. I wouldn’t say it’s nonstick but it’s mostly fine.
A $20 Teflon pan would be flaking and unusable, so for $20 it’s a good deal.
I bought those cheap marble coated pan, now entering 2 years of frequent use, other than tiny bit of degraded non-stick capability, it works just fine, didn’t even chip. I bought an expensive teflon once, it only last around half year before it start chipping. Teflon is just bottom tier coating now.
I also own a cheap cast iron skillet, cook with it frequently, wash with soap and only heat dry it, didn’t even bother with seasoning after washing, it now has a nice, smooth patina on it that mostly non-stick. I genuinely don’t get why people always baby a cast iron, it’s a hilux, not a cybertruck.
to answer your question, I’ve heard it described as half hobby/half pan. And quality can vary on the finish. Mine required a full restoration after a potato took the seasoning with it. Since then, low maintenance.
Damn. Whatever happened to that potato
Crossed the border with the seasoning literally tied to the roof rack of his car and hasn’t been heard from since. #nogoodpotats
I have a cast iron griddle that I use once a year at my mom’s house. I leave it in the outdoor grill when I’m done using it and don’t even clean it. The next time I go to use the grill, I take out the cast iron griddle and just leave it out in the elements and it rusts like crazy.
Then, the day I’m ready to use it again, I scour the shit out of it, heat it up to 500-600°, throw some oil on it like a greased up whore, and get the lowest quality seasoning on it.
Then I use it to grill some ears of corn so they don’t turn black from the soot of all the wood I burn to heat the outdoor grill. Once the corn is done cooking, I close off the grill and tell the cast iron griddle to go fuck itself.
That sounds like a waste of effort to me, but you do you.
80% of my life is wasted effort. 15% is giving up at “good enough.” 5% is me looking back at my choices and and saying “yeah, I guess that was a good idea after all.”
lemm.ee has a profanity filter too?
I don’t see any censorship in that post.
Maybe it’s .ml? I see shit, whore, and fuck (as in poop[s•••], sex worker[w••••], and sex[f•••], in case they get censored)
Ah, they filter other way too, huh.
What a shitty instance
Do test cast iron pans for lead please. Even cheap ones from Target (especially cheap ones)
How can I test one for lead?
I looked up “lead testing” and my state, and was directed to their health department’s recommendations for both lead in homes and for child care center testing. They have links to several labs with kits that get mailed to you, typically you swab or take a sample, then mail it back to the lab. There are also in home test kits for lead on sites like Amazon that process immediately (have a color change when lead is present iirc), idk how accurate those are but could be at least a good starting point for some items.
It’s like gold, you bite it and see if it’s soft.
The FDA bans lead in cookware: https://blogs.edf.org/health/2023/08/15/fda-says-cookware-that-exhibits-any-level-of-leachable-lead-upon-testing-is-prohibited/
Although I’m a little surprised it took until 2023 to make this happen. In any case, stuff bought at retail should be fine. I’d be very surprised if Lodge cookware–what Target usually sells–ever had lead in it.
Amazon stuff, though? That place is a leaky sieve of Chinese goods that wouldn’t normally be allowed.
There was lead in literal food on shelves. https://www.pbs.org/newshour/health/recalled-lead-tainted-applesauce-pouches-stayed-on-dollar-tree-shelves-for-weeks-fda-says
Really think about supply chains and products and the benefits that China or hostile nations may have to send poison to the US (instead of bombs). People assume these products will be safe but we have modern day examples where they clearly aren’t, no matter what the laws say. The law doesn’t matter if it isn’t enforced. Items can be swapped or mislabeled. https://www.nzherald.co.nz/lifestyle/temu-toxicology-test-concern-as-lead-is-found-in-an-item-sold-on-the-site/XL5OYZ6JWJEQFAHEVK6GZUMIGY/
Lodge won’t, but all the random no-name brands might. That and the “chef ____” type cookware is rarely quality controlled, it’s generally just made to make money off a famous person’s name off food network
It’s fine and good to wash cast iron - particularly if you had something corrosive in there. Don’t do it in the dishwasher (change in heat can be bad for it - same reason not to machine wash kitchen knives).
People who say washing your pan will remove the seasoning have not properly seasoned their pans or see food residue washing out and think it is the polymerized oils bonded to the metal that are washing out. If that’s the case, they are washing way too aggressively.
There used to be some truth to the advise of not washing cast iron because those old-fashioned soaps had lye that could break down the seasoning. So I guess if you like to use boutique soaps you should be mindful if they contain lye. But if you’re just using dawn dish soap like probably 90% of everybody, go to town, you’re not going to remove seasoning with dish soap
it’s so much better than stainless
debatable but i think so
it takes a little maintenance
everything needs maintenance in the sense that you have to clean it. jokes aside, the only maintenance it needs is to burn oil in it if the seasoning got a little damaged for any reason
can’t cook anything tomato based
you can, it’s not great but won’t ruin it
eight coats of oil you have to burn onto it before you can use it
that’s not true, all cast iron pans come pre-seasoned from the factory
you can cook fried eggs and steak
that is true
even after seasoning it everything will still stick to the pan
not really, it’s pretty non-stick
to clean it you gotta heat it up then dry salt scrub then re-season
not really, you only need to do that if the seasoning got damaged
if water ever touches it the entire thing will disintegrate
that’s not true, you’d have to leave it in water for days to get it to rust
things that aren’t mentioned: you gotta use it regularly otherwise it gets sticky; you can use metal tools like knives and spatulas directly in the pan that would demolish any teflon; the seasoning is more resilient than people think, you can even wash it with dish soap; the seasoning actually gets stronger when you fry fatty things in it (grilled cheese, steaks, eggs, sausages); it’s very simple, durable, rustic, old technology, and incredibly cheaper than skillets of a similar quality (excluding cheap teflon pans); you can unrust it in your garage and even weld it back together if it breaks, which is sick as hell.
“some of this is true”
you can unrust it in your garage
You can very easily de-rust cast iron cookware with Ospho which is basically phosphoric acid (Loctite naval jelly available at Lowe’s is the same stuff in gelled form, which is a bit grosser). Obviously you have to rinse it really well afterwards, but it’s a hell of a lot easier than trying to physically remove the rust.
I’m with you 100%.
I’ll add that I rarely use my cast iron in the kitchen, preferring to use it on camping trips or the grill. Why? The sheer heft of the thing could accidentally cause my glass cooktop some trouble. For those occasions, I reach for my well-seasoned carbon steel pans: much lighter with most of the same non-stick situation as the iron skillet.
I don’t know your glass cooktop, but i’d be shocked if the weight of a cast iron was enough to damage it. Does this mean you also wouldn’t put a cooking pot full of water on it? Mine had no problem, didn’t even get scratched which i was worried it might.
That said i do think cast irons can be too heavy for some people, especially when it’s full
Here’s the thing: I’m a klutz, and do not always watch my hands (damn ADHD). So this whole thread is semi-rational at best. Still, I’m certain that I’m the guy that would drop it one or more inches onto the cooktop by accident. I honestly don’t know how resilient these things are, but I’m not about to find out.
That said, I looked up some numbers for weights and well, it’s really not too different from a full pasta pot. I may just have to work up the courage. Thanks.
Yeah i believe you can break a cast iron, it will snap instead of bend, but i have no idea how hard you’d have to drop it. It also probably would damage the glass
glass cooktop
This is one gripe I have with my own cast iron, is that it marks up my glass cooktop when I use it. I can return the top to pristine condition by scrubbing it with steel wool, so it’s not permanently damaging it, but it’s kind of annoying to me that you can see which one of the burners I use way more often than the others because its discolored in a cast iron-sized circle.
Deep scratches are one major concern/gripe I have with glass cooktops, hence why my skillet goes nowhere near it. Scratches can introduce weak points that can nucleate a fracture.
https://glassdoctor.com/blog/why-did-my-glass-top-stove-crack
When dragged across the glass surface, rough pots and pans create micro-scratches. When they accumulate over time, they can weaken the integrity of the glass to the point of cracking.
My biggest gripe with Teflon, after the whole PFAS problem, is that you have to baby it. I never was able to find a plastic spatula that worked well for any application. At worst, some are so darn floppy it’s like trying to flip an fried egg with another fried egg. Not to mention, the leading edge would eventually melt and deform sending plastic shreds everywhere over time.
The things you can do cooking-wise with metal tooling just get you more control and better results. Any pan/pot that lets you do that is going to help your overall cooking experience. Plus, even if you don’t go carbon steel or iron - say, stainless or even glass - de-glazing the pan with some water and heat from the range can make short work of cleaning.
One last point to this rant: your favorite cooking shows are lying to you softly. Your cookware are tools - they’re gonna get fucked up. Used things eventually get scratched, stained, singed, dented, and that’s okay; I promise you they’re not unsanitary because they’re in this state. Those stainless pans with mirror-perfect surfaces, or carbon steel skillets with that pristine golden hue, they’re new; you usually see new product on camera thanks to sponsors and the general optics of the thing. Teflon pans hold out this false promise of pristine cook surfaces that just aren’t realistic. And in practice, even those awful things do not go the distance. So yeah, reject modernity and all that. You’ll be okay.
Why would you use a plastic spatula? I use wood with teflon - doesn’t scratch and isn’t floppy!
Right! I use silicone spatulas because I like the slight bit of flop it has, but there are options besides pan scratching metal and really crappy, pan saving plastic spatulas.
I’m honestly surprised it took this long before Teflon and PFAS in general became a more public issue.
Especially after project farm showed how easy it is to scratch the coating material. I think only like 2 pans actually held up somewhat in hardness.
Not objective by any measure, but I don’t think ingesting dissolved iron is as bad as dissolved Teflon.
Some would even say that ingesting dissolved iron is required for your health.
Don’t these pans last like generations, being passed down? I doubt your grandma and her grandma were bothering to apply 8 coats of flaxseed oil and heating it up to 1000 degrees and the pans would still perform as expected for ages
I’ve been using the cast iron pan handed down to me for like 30 years. It skipped a generation and went straight from my grandmother to me. I don’t know exactly how old it is though
If I know grandmas, I was probably purchased at Kmart in like 1996.
If you know basic math, it was probably purchased before 1996 based on my original comment. It was also very well used when she gave it to me.
Sorry. Just trying to make a joke a grandmothers’ expense. My grandma had several artifacts that she claimed were ancient and/or hand crafted that were definitely not.
We were 3/4 of the way through mounting her hand painted collectible plates when we found two that were 100% identical.
Has anyone outside of a commercial kitchen ever actually destroyed a stainless steel pan though
Yes.
Apparently you can’t hear up tortillas in them without it forever getting scorch marks. I suppose only thing I haven’t tried is using a machine sander on it to try to remove it.
Are those scorch marks an issue beyond aesthetics though? (Genuinely curious, not judging)
They leave a burnt taste in the food
In that case, try boiling a mixture of baking soda and water in it, then scouring it using tongs with copper wool (I’d probably use steel wool, but that might also leave scratches, I don’t know). If it’s giving your food a taste, it is coming off, just really gradually and under high heat.
Done that already before, twice.
Womp womp
Barkeepers friend (powdered metal and glass polish/cleaner, typically comes in a cannister) will get that off with a little bit of elbow grease.
Half the pans I’ve bought i got at a thrift store for like a buck because people thought they ruined them with a little bit of scorching., and I’ve gotten some nice stuff.
Unfortunately haven’t found that cheaply available in Finland. I know about it too. It’s the only thing I haven’t tried other than straight up sanding it
So the legend of bar keepers friend is that it was invented after someone boiled a bunch of rhubarb greens and noticed it cleaned the pan. I reckon any green high in oxalic acid (the main ingredient in BKF) should do similarly enough to the actual product to let you know if it might work.
There’s probably a local equivalent; looks like the primary “ingredient” is Oxalic Acid so a cleaner containing that would probably work just as well
Really? It sounds like you’re burning your tortillas, or your tortillas don’t have enough oil/fat in them.
*corn tortillas
Perhaps you’re cooking them too hot? Or perhaps you’re getting uneven heat (e.g. an electric coil stove)?
Corn tortillas really shouldn’t be at risk of burning like that.
I think it was uneven heating since the steel pan had groves in it
A straight angle grinder is better suited for that job
Yes. Intentionally though.
I have a cast iron pan. Pros - it’ll last forever if you look after it, it doesn’t contain PFAS and generally it is non-stick enough to not be a nuisance. Cons - heavy AF, needs to be cleaned and dried after use & not in a dishwasher. I haven’t tried to cook anything acidic in it yet but it does okay for steaks, eggs, mushrooms, sauces that I have used it for.
I still use soap and a plastic scrubber on mine and just dry it on the hob for a bit. I haven’t had to reseason it yet but I imagine it will be a pain in the ass when I do. I have seen part of the seasoning flake off but it normally self heals with more cooking.
So it’s okay overall but I think lack of PFAS and the fact that this thing will last a lifetime are the clinchers. Even if you have non-stick buy one of these and use it by default. I expect a stainless steel pan would be good too for same reasons.
Look for antique CI and you’ll get less weight. I love CHF (Chicago Hardware Foundry) and BSR (Birmingham something something…) pans because they’re thinner casting and smooth finish. I also have some Antiques from the 19th C that get regular use. I can’t stand modern pans. They are all way too heavy, and that pebbled surface is a pain in the ass to cook on and clean. It’s no wonder people hate cast iron
I’ve heard from several sources that the iron is supposed to be good for the diet. I love my carbon steel and cast iron kitchenware. All of the studies I’ve seen show it as a superior option to PFAS cookware and will still outlast the latest ceramic options. I have a very non-stick carbon steel pan and griddle from avocado oil seasoning.
You didn’t mention that you’re oiling it after drying it. It’s recommended that you lightly oil the surface upon storage.
One Source: https://www.youtube.com/watch?v=Px6jqcYFdFs
I’ve heard from several sources that the iron is supposed to be good for the diet. I love my carbon steel and cast iron kitchenware. All of the studies I’ve seen show it as a superior option to PFAS cookware and will still outlast the latest ceramic options. I have a very non-stick carbon steel pan and griddle from avocado oil seasoning.
You didn’t mention that you’re oiling it after drying it. It’s recommended that you lightly oil the surface upon storage.
I think cast iron will definitely outlast ANY non-stick, no question. For non-stickiness though it’s basically on the tolerable end - put oil in it and most stuff will slide around but sometimes you don’t want too much oil so its a trade off. I think stainless steel is a great option in its own right - it’s not really non stick but it can be made tolerable with oil and can be scrubbed back to condition and thrown in the dishwasher.
I sometimes coat my cast iron pan in oil, but more often than not I don’t.
For non-stickiness though it’s basically on the tolerable end - put oil in it and most stuff will slide around but sometimes you don’t want too much oil so its a trade off
Not sure if you are saying the non-stick surface of a seasoned (carbon steel or) cast iron pan is inferior to PFAS options, that’s how I’m responding below.
Speaking from experience, I’ve screwed up seasoning pans before I got it what I’d call right.
A poorly seasoned polymerized surface on any metal (cast iron, carbon steel, stainless steel, or titanium) will always fair poorly, though more healthy than teflon style pans.
A properly seasoned polymerized surface on any smooth metal is easily on par or superior (regarding stickiness) with non-stick PFAS or metalized ceramic.
It absolutely requires minimal oiling when properly seasoned. I absolutely use less oil in my carbon steel pans than I would with ‘non-stick’ pans.
Another issue I see frequently is putting food into a pan that is too cold.
I think stainless steel is a great option in its own right - it’s not really non stick but it can be made tolerable with oil and can be scrubbed back to condition and thrown in the dishwasher.
Stainless steel can be non-stick using either the Leidenfrost effect or seasoning/oil polymerization. I do like being able to put my dishes through the auto-wash. My carbon steel and cast iron surfaces being the exception.
I sometimes coat my cast iron pan in oil, but more often than not I don’t.
I’m telling you what my experience is. I have pans that have a self healing non-stick surface. I don’t put soap on my cast iron or carbon steel unless planning to re-season. I boil water and may agitate it with salt if something sugary stays stuck to the surface. The flame/heat sterilizes, and the water+salt granules removes particulate.
I can fry an egg with less than a light spray of oil and produce a picture perfect egg consistently.
I’m in process of removing all of our PFAS or newer titanium ceramic gear due to it failing from scraping or flaking.
I am not eating out of your kitchen, not trying to tell you how to manage the tools. Offering suggestions, I feel could make life easier for you.
If it works for you, and you’re happy - carry on.
Stainless steel pans are amazing when used for the right purpose. They weigh much less than cast iron, don’t require any maintenance beside cleaning them, and they are pretty much indestructible. If you burn something badly you can use metal scowering pads or any chemical you damn well like (including sodium hydroxide that will melt flesh) to get the thing clean again. They are tolerant to any cooking temperature you would ever use, ever. You can’t overheat one with any appliance a normal kitchen would have. This means you can easily pop one in the oven provided it has a metal handle.
The only issue being they have no non-stick properties to speak of and relatively little thermal mass. This is good in that they don’t need long to heat up, but bad in that it’s not a consistent temperature and you have to know what you are doing with the power control to get the results you want. This means it’s essentially useless for cooking things like steak, and difficult even to cook an omelet without using a lot of butter, ghee, or oil. Things like tomato sauces though? Perfect. The stainless steel could care less about the acidity.
So the stainless steel does care at least a little bit about the acidity?
What made you think that?
Well you said the stainless steel could care less. In order for it to be able to care less, that means it has to care at least a little bit to begin with.
Hi David Mitchell!
Love my cast iron pan and my stainless and mostly agree. Just want to point out that stainless steel isn’t really comparable to cast iron. Cast iron is cheap while good stainless pans are quite expensive, and you can’t really season stainless to be nonstick. Sticking is actually a feature of stainless, because then you can use a technique called “deglazing” to make a flavorful sauce out of the stuck bits.
I have one of each and I like them both for different things.
Mostly agree. I want to add, there are ways to make your stainless steel produce a non-stick effect.
Very similar to the method used to produce a non-stick surface on carbon steel, cast iron, and other heated cooking surfaces. Essentially you apply a light coat of oil and created a polymerized surface on the pan.
One source: https://www.youtube.com/watch?v=qXEt-fhyCis
Edit: Another Source (Leidenfrost effect): https://www.youtube.com/watch?v=FUwaOnCd1h0
I never understood fans of cast iron. Its like still using candles for light, sure it gives a warming light, but electricity is cheaper, safer, and quicker to use for light. Same for pans, stainless steel have exactly the same use as cast iron without any of the inconvenience. Sure heating behavior is different, but who cares, you can get to the same results with stainless steel with a bit of experience… If you really want that “hipster cooking” feeling, just use copper, sure its way more expensive and you need to be extra careful, but its still better than to try using cast iron which is a real pain in the ass to use, making cooking twice as long as it should be… And for Teflon… it’s shit, weak as hell and will give you cancer. Aluminum is shit too, still better than teflon and at least its the cheapest.
If you’re buying modern garbage $10 pans from Dollar General don’t be surprised when they’re not performing as well as your Cuisinart SS. I have all SS and cast iron, and they both get about equal usage. CI is just better for meats. The higher heat conductivity and even temperature across the surface (with proper time to warm up) is incredibly useful. Searing is unsurpassable with CI. You can be rough with CI and it takes the beating in stride.
SS is better for quick heat and rapid changes in temperature. Boiling water, sauces, roux, etc.
I’ve had cast iron pans with old dinner remains sat in the bottom for 3 days, it comes off with hot water. And yes I use soap and water. If you use a good oil for seasoning and you set your pan up nicely you don’t have to worry about babying the seasoning.
twice as long
If you’re using CI for the right use cases it is WAY faster than aluminum. As I said, the heat transfer of iron is extremely good compared to thin walled aluminum or stainless. CI will cook chicken very fast. It’s all down to knowing your tools and using them correctly.
I can tap a nail into a wall with pliers, doesn’t mean they won’t do the job as well as a hammer.
I cook with cast iron almost daily, all I do is scrub it with hot water and let it dry, and it’s ready for the next day.
Nothing cooks fried eggs as well as my cast iron pan. Fried eggs, scrambled eggs, french scramble, omelettes, any kind of eggs. Sometimes I use it for sausage too.
I use stainless for everything else.
It seems obvious you purchase equipment for restaurants. /s
Quite a hot take there. You ignored carbon steel in the conversation.
A large number of restaurants use rolled carbon steel or cast iron for searing and shallow frying.
Well, I found it to be easier than stainless. I know how to use stainless in theory, but I never managed to use it properly. lol
I realized there’s a hipster factor around it but I really find it easy to cook a lot of things without thinking twice. I’m only careful when I clean it.
Yeah, cast iron is a giant pain. I have a relatively heavy steel pan, which is fantastic for cooking anything I would cook on a cast-iron pan because it retains heat well, and it’s easier to clean.
Screw cast iron, the only cast iron thing I like is my enamel-coated pot for soups, and that’s because it avoids pretty much everything about cast iron except heat retention.